Siemens SINUMERIK Series Function Manual page 248

5 Statistics/Export
5.1 Multi-machine views
The measurement series is selected by clicking the "Open" icon in the correspond-
ing line.
Fig. 5-11: Comparing measurement series in the selected measurement series group
In an overview, the system shows all measurement series examined in one com-
parison grouped by machines. In this overview, the selection of the measurement
series to be examined in the comparison function can be changed. The system will
make a preselection, to the effect that from each machine only one measurement
series will be considered for displaying. The criteria for this preselection is the
number of measurements contained in the measurement series. For each ma-
chine, the measurement series with the most measurements will be marked as se-
lected. By selecting, this preselection can be overwritten at will.
Displaying measurement series
In order to display measurement series in a diagram, the machine operator must
select the required characteristic from the table. The system will then generate a
diagram showing the progress in time of the selected characteristic for each of the
measurement series considered in the comparative display. There are various
functions available for changing the diagram or displaying detailed information.
Function
Machines
5-248
Description
In the "Machines" table, all measurement series considered in
the comparative function will be listed according to machines.
Individual measurement series can be excluded from being
displayed in the diagram or included again.
ePS Network Services, Function Manual (FH) - 03/2012
© Siemens AG 2012 All Rights Reserved
03/2012