Siemens SINUMERIK Series Function Manual page 158

3 Setting up functions
3.4 Fault services
Function
Last execution
Undefined
Last execution
on
Each trigger can be assigned a label, which determines its behavior at the central
start date for maintenance.
See also Section: Editing the master data of a machine and the general description
of the trigger in Section: Setting up functions.
Options:

If a label has been set and a start date, which has not yet been reached, has
been configured in the overview of the control monitors, the trigger will not be
initiated.

If the date has been reached or is in the past, the interval starts and a trigger
is initiated at the end of the interval.

If a start date has not been configured, or the label has not been set, the
trigger will be initiated at the end of the interval according to the conditions set
for it.
Notice
The starting time and start date are not the time of the first trigger, but the start of
the interval at the end of which the trigger takes place.
3-158
Description
Either by selecting the
- first
- second
- third
- fourth
day of the week from Monday to Sunday in the
month
- OR -
one day from 1 to 31 in the month (then, without
a weekday).
There is no restriction pre-selected regarding a
last initiation.
If you deselect undefined, you need to select a
date for the last execution.
You can only make an entry if undefined is de-
selected for the last execution.
The can only specify a date for the last execu-
tion via the calendar selection function. See
above: Calendar field
ePS Network Services, Function Manual (FH) - 03/2012
Type
SELECTION
(1 to 99 999
minutes or
hours)
DISPLAY
SELECTION
(Toggle)
DISPLAY
SELECTION
© Siemens AG 2012 All Rights Reserved
03/2012