Siemens SINUMERIK Series Function Manual page 295

03/2012
Function
Machine-related settings
PLC performance
index
Disable new confi-
gurations
Common start date
E-mail notifications
Response to chan-
ges in
measurement se-
ries
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Release of PLC resources for ePS Network
Services:
See also: Control monitors
The higher the value, the more functions
can be implemented with ePS Network
Services.
Default value: 50
Switches all machines to "Standby".
When creating control monitors for mainte-
nance procedures, if you always want to
start automatically with the same common
maintenance start date, you can specify the
date here.
Independent of this, participation in a
common start date can be individually
defined for each control monitor.
Because e-mail notifications only have the
machine ID of the machine owner for identi-
fication (the released responsible service
organization may use a completely different
ID), you also have the option of sending
additional information about the location,
company, and production unit along with
the e-mail.
The following applies when prompting be-
fore resetting the contour monitoring:
 Not selected: After a change relevant
for the axis test, a one-time manual
execution of the axis test is required in
order to be able to execute this auto-
matically
 Selected: An existing successful execu-
tion can be confirmed after a change
relevant for the axis test so that a man-
ual axis test does not have to be per-
formed again
6 Management
6.1 Organization administration
Type
DISPLAY
INPUT
[Values
between
1 and 100]
SELECTION
(Toggle)
SELECTION
(Toggle)
SELECTION
(Toggle)
SELECTION
(Toggle)
6-295