Siemens SINUMERIK Series Function Manual page 123

03/2012
Function
Name
Conditions AND-linked (x)
Absolute
address
ePS variable
Generic
variable
NC variable
NC ePS
PLC
variable
SINAMICS
variable
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
A name can be assigned to the AND'ed list of
conditions. If the field remains empty or is deleted,
the system generates a name from the parame-
ters. The name varies according to the screen
resolution.
If the name already exists, a consecutive number
is automatically added in parentheses.
If the name is too long, the number added can
only be seen in a tooltip.
REAL - directly input or selected from the ePS
variable list.
BOOL, BYTE; CHAR; DINT; DWORD; INT; REAL;
STRING; WORD - the address expression must
be directly entered.
REAL, STRING - the address expression must be
directly entered.
Traversing path, traversing distance rapid trav-
erse, traversing time, traversing time jerk, travers-
ing time rapid traverse, traversing operations,
traversing operations jerk, traversing operations
rapid traverse, jerk, motor temperature - for each
configured NC axis - no additional input is re-
quired.
BOOL, BYTE; CHAR; DINT; DWORD; INT; REAL;
WORD - the address expression must be directly
entered.
REAL - the address expression must be directly
entered.
The system supports plausibility for the absolute
addresses, their data types, or the possible com-
parison operations. If required, the user must
adapt the interpretation versions of a data format
in order that they match the comparison value
(BCD, ASCII, etc.)
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(max. 40
characters,
all characters
are permissi-
ble)
INPUT
DISPLAY
3-123