Siemens SINUMERIK Series Function Manual page 161

03/2012
Function
Absolute ad-
dress
Cond.
Oper.
Value(s)
Hyst.
Paste
Clipboard
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
The address must be input in the syntax speci-
fied for the specific device.
If the format of the addressed variable is not
clear, then it is possible to manually select in
which format the variable should be inter-
preted.
If the trigger is initiated for every change, trig-
gering can be performed for changes in value
ranges. For example, temperature range from
90 to 110° under or overshot.
Comparison operations that are restricted to
the format of the variables can be selected.
Equal to, unequal, greater than, great than
equal to, less than, less than equal to, IN (in
the range between two values), OUT (outside
a range of two values)
Specifies the comparison value.
Specify a relative value, referred to the com-
parison value.
A new trigger to the comparison value is only
realized if the actual value differs from the
comparison value by more than the specified
hysteresis.
A detailed configuration, saved in the clip-
board, can be selected and copied into the
actual configuration.
The system only offers the detailed configura-
tions that match the actual configuration.
The clipboard can be viewed in order to possi-
bly copy a selection from this into the actual
configuration.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
DISPLAY
SELECTION
SELECTION
DISPLAY
SELECTION
DISPLAY
INPUT
(restricted
depending
on the speci-
fied address
format)
DISPLAY
INPUT
(restricted
depending
on the speci-
fied address
format)
ACTION
ACTION
3-161