Enter The Final End User Data (Euna); This Is How You Generate The Machine Logbook - Siemens SINUMERIK 828D Service Manual

Service cases - software

3.7 Enter the final end user data (EUNA)

3.7 Enter the final end user data (EUNA)
Precondition
At least access level 3 must be set to change the end user final destination data (EUNA).
Repair and Service Contract (RSC)
SINUMERIK offers an electronic logbook in which all of the activities relating to the Repair
and Service Contract (RSC) are saved.
After the service call has been completed, the control data are checked and are transferred
to the EUNA database for update.
3.7.1

This is how you generate the machine logbook

Machine data
The following data are saved in the control in the "Machine logbook":
● Contact data of the manufacturer (OEM)
● Contact data of the dealer
● Contact data of the end customer
● Log of the service and diagnostic procedures that have already been carried out.
During a service call, the data should be checked as to whether it is correct.
Open the "Machine identity" dialog box
Procedure:
1. Select the "Diagnostics" operating area.
2. Press the "Version" softkey to open the "Version data" dialog box.
3. Press the "Details" softkey.
60
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0