Siemens SINUMERIK Series Function Manual page 96

3 Setting up functions
3.1 Maintenance
Function
Selection
Name
Axis
[ ]
Machine
status
variables
3-96
Description
The predefined variables whose values are to be
recorded must be selected in the variable tree.
Opens a form to configure a new variable.
Edits the configuration of a freely defined variable
Name of the variable.
With variables that refer to an axis, the name of
the machine axis is displayed here.
The reference to an axis can be changed as long
as no data was captured for this variable.
The unit of the variable is displayed in this col-
umn.
Creates a copy of a variable.
Removes the variable from the configuration and
deletes the data of this variable
The following variables are available as standard
when the machine status display is activated and
are also listed in the machine events when this is
selected.
The selection is made in the administration in the
settings for the machine.
Machine status

Connection

Communication established

Machine connected
The following are recorded as event

Communication established

Communication interrupted

Data acquisition started

Data acquisition completed

Machine disconnected

Machine connected
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
03/2012
Type
DISPLAY
SELECTION
ACTION
ACTION
DISPLAY
DISPLAY
SELECTION
DISPLAY
ACTION
ACTION
DISPLAY
SELECTION