Siemens SINUMERIK Series Function Manual page 283

03/2012
Function
Status
Remote access
Always request
approval
Measurements
Display rigidity
Machine status
Archive event
Automatic
connection
Connection via
Device class
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
If the machine requests remote access
(this is only possible from the machine),
and the location to be accessed con-
nects to the machine, access approval
must be granted again on the machine.
Where remote access is concerned, a
distinction is still drawn between the
different actions (visualization and op-
eration; retrieving data; saving data; NC
operation; PLC access) that must be
acknowledged in a session as having
approval.
Here you can define whether the rigidity
is also to be displayed for the axis test.
"Activate machine status detection" The
monitoring of the client is activated auto-
matically. The variables that can record
the start and end of the possible data
acquisition are available.
"Generate machine event"
The data acquisition start and end status
signals generate event entries.
Machine events are generated for reading in
archives at the control.
"Connect machine automatically"
The client of the machine automatically
connects to the server as soon as a
connection is established.
The following can be selected to detect
a connection:

IP address

MAC address

Machine name (max. 50 charac-
ters)
The device class defines which ePS
Network Services can always be used
on a particular machine. Various func-
tions cannot be used depending on the
device class.
See also Section: Client diagnostics
SINUMERIK, S7, and IPC are available
in the selection.
6 Management
6.1 Organization administration
Type
DISPLAY
SELECTION
DISPLAY
SELECTION
DISPLAY
SELECTION
DISPLAY
SELECTION
DISPLAY
SELECTION
DISPLAY
SELECTION
DISPLAY
SELECTION
INPUT
DISPLAY
6-283