Siemens SINUMERIK Series Function Manual page 124

3 Setting up functions
3.4 Fault services
Function
Operation
Comparison
value
or
Comparison
address
Add
Paste
Clipboard
3-124
Description
Only the operations possible for an address type
are available.
The following are possible: =, ≠, >, <, ≥, ≤, IN,
OUT.
The operations are applied according to their
mathematical significance.
IN is a comparison with two different comparison
values, whereby the condition is fulfilled if the
value lies within the two values.
OUT is a comparison with two different compari-
son values, whereby the condition is fulfilled if the
value lies above the higher of the two values and
below the lower of the two values.
Any value in the format, which matches the abso-
lute address.
See: Absolute address
ePS variable, generic variable, NC variable, NC
ePS, PLC variable, SINAMICS variable - defined
in the formats as under absolute address.
For each condition, the complete comparison
expression can be saved in order to be able to
insert it at another corresponding position.
A complete comparison expression can be de-
leted for each condition.
Creates additional edit fields for an additional
variable comparison with the same function scope
as described above.
The comparison results are evaluated as an AND
logic operation.
Select a detailed configuration saved in the clip-
board and copy it to the current configuration.
The system only offers the detailed configurations
that match the actual configuration.
View the contents of the clipboard in order to copy
a selection from this to the current configuration.
Copy a variable comparison line to the clipboard.
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
03/2012
Type
DISPLAY
SELECTION
INPUT
DISPLAY
SELECT-
ACTION
ACTION
ACTION
ACTION
ACTION
ACTION