Siemens SINUMERIK Series Function Manual page 247

03/2012
Machine selection
The selection of the machines to be considered for the comparative inspection of
measurement series is done is via the group for "Select machine".
Fig. 5-9: Selecting the machines via the machine tree
Selection of measurement series
After having selected the machines to be considered, the system will create an
overview over the comparable measurement series. This overview contains the fol-
lowing information:

Name of measured axis

Values of the measurement series parameter relevant for the comparison

Number of machines that have a comparable measurement series
Fig. 5-10: Overview on the measurement series groups
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
5 Statistics/Export
5.1 Multi-machine views
5-247