Sub-Function: Send Status With On-Delay - MDT Glass Push Button II Smart Series Technical Manual

Technical Manual Glass Push Button II Smart BE-GT2xx.01

4.3.1.5 Sub-function: Send status with on-delay

Single-button function
With the single-button function "switch" - Sub-function: Send status with on-delay, the key sends the
value "On" for pressing the key and the value "Off" for releasing the key. However, the value "On" is
delayed by the set time delay. If the key is released before the set time delay has elapsed, no "On"
value is sent.
The following figure shows the available settings:
Figure 19: Settings: Single- utton fun tion „" it h -"send status with on-delay"
The following diagram illustrates the behavior of this subfunction:
Figure 20: Diagram - behavior "send status with on-delay"
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
50
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de