MDT Glass Push Button II Smart Series Technical Manual page 34

Technical Manual Glass Push Button II Smart BE-GT2xx.01
Standby display at day
State element 1-4
Indicated level in/after
standby
Standby display at night
State element 1-4
Indicated level in/after
standby
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
34
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
no standby
standby in upper
keypad
standby on full screen
display off
display off and
orientation-LED on
not active
time
internal temperature
State value 1
State value 2
State value 3
State text 1 (over
object 120)
State text 1 (over
object 121)
Level 1
Level 2
Level 3
no standby
standby in upper
keypad
standby on full screen
Behavior like day
display off
display off and
orientation-LED on
not active
time
internal temperature
State value 1
State value 2
State value 3
State text 1 (over
object 120)
State text 1 (over
object 121)
Level 1
Level 2
Level 3
Setting the display behavior of
the information screen in day
mode
- „not active only at State
element 2-4!
- „I ter al temperature anly
available for BE-GT2Tx.01!
A maximum of 4 status
elements can be activated
which are switched according
to the setting "Change standby
display after".
When setting to "Standby on
the upper keypad" , an active
level during standby can be
selected; For "Standby on full
screen" a level after standby
Setting the display behavior of
the information screen in night
mode; When set to "Behavior
like day" the settings are
accepted by day mode and
there are no settings for the
standby mode
- „not active o l at "tate
element 2-4!
- „I ter al te perature a l
available for BE-GT2Tx.01!
A maximum of 4 status
elements can be activated
which are switched according
to the setting "Change standby
display after".
When setting to "Standby on
the upper keypad" , an active
level during standby can be
selected; For "Standby on full
screen" a level after standby