MDT Glass Push Button II Smart Series Technical Manual page 29

Technical Manual Glass Push Button II Smart BE-GT2xx.01
Adaption to ambience
The following settings can be used to influence the adaptation of the display to the ambience:
Figure 5: Settings: Adaption to ambience
The following table shows the possible settings:
ETS-Text
Adapt display brightness to
ambience
Adapt display brightness to ambience: No
Brightness at day
Brightness at night
Adapt display brightness to ambience: Yes
Brightness
Minimum Brightness at day
Minimum Brightness at night
Overnight shutdown in Standby
Table 9: Adaption to ambience
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
29
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Dynamic range
[Default value]
No
Yes
0-100%
[10%]
0-100%
[3%]
Brightness level 1-10
[Brightness level 8]
0-100%
[10%]
0-100%
[3%]
not active
threshold 1
(moderately dark)
threshold 2 (dark)
threshold 3 (very dark)
Comment
Setting whether the brightness
is dynamically adapted to the
ambience
Setting a fixed brightness value
in day mode
Setting a fixed brightness value
in night mode
Sets the basic brightness of the
display
Setting the minimum
brightness of the display; below
this value, the display is not
dimmed during daytime
operation
Setting the minimum
brightness of the display; below
this value, the display is not
dimmed during night operation
Setting of the display behavior
for the overnight shutdown in
standby mode