MDT Glass Push Button II Smart Series Technical Manual page 35

Technical Manual Glass Push Button II Smart BE-GT2xx.01
Action at push button if display
is disabled (only for hardware
from R1.5)
Action at push button if
standby is active (only for
hardware from R1.5)
Table 11: Basic Settings - Information Screen
The setting "Standby over full screen" additionally activates the orientation LEDs.
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
35
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Standby is exited
Standby is displayed
Function is not
executed
Funktion is executed
Setting the behavior when a
key is pressed when the display
is off (e.g. via presence object)
Setting whether the key
function is to be executed with
the first key press while beeing
in standby