Switch/Send Value Short/Long (With 2 Objects) - MDT Glass Push Button II Smart Series Technical Manual

Technical Manual Glass Push Button II Smart BE-GT2xx.01

4.3.3 switch/send value short/long (with 2 objects)

Single-button function
Two-button function
With the function "switch/send values short/long (with 2 objects)", 2 different values can be sent for
the short and long key. The short and the long key have different objects, whereby it is also possible
to send out different data point types.
The following figure shows the available settings (here for the two-button function):
Figure 28: switch/send value short/long (with 2 objects)
The table below shows all available settings:
ETS-Text
Action for short/long push
button
Datapoint type
Table 40: switch/send value short/long (with 2 objects)
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
61
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Dynamic range
[Default value]
switch
(two-button function)
switch On (Single-
button function)
Switch Off (Single-
button function)
toggle
send value
nothing
DPT 2.001
Switch control
DPT 5.001 Percent
DPT 5.005
Decimal factor
DPT 17.001
Scene number
DPT 9.001 Temperature
DPT 9.004 Brightness
DPT 232.600 RGB value
Comment
Setting the function for the
short/long key
Setting only available when
"Action for short/long push
button" is set to "send values"
Sets the datapoint type for the
value to be sent