Program 31 : Paging Setup; System Options For Internal/External Paging L - NEC SL1000 Programming Manual

Issue 0.1
31-01 : System Options for Internal/External Paging
Level
IN
Description
Use Program 31-01 : System Options for Internal/External Paging to define the system options for
Internal/External Paging.
The system shows the name you program on the telephone display. Use the following chart when
entering and editing text. When using the keypad digits, press the key once for the first character, twice
for the second character, etc. For example, to enter C, press 2 three times. Press 2 six times to display
the lower case letter.
When entering names in the procedures below, refer to this chart. Names can have up to 12 digits.
Use this keypad digit . . .
1
2
3
4
5
6
7
8
9
*
#
Clear/Back
Flash
Input Data
Item No. Item Name
01
All Call Paging Zone Name
Assign a name to each All Call Internal
Paging zone. The name shows on the
display of the telephone making the
announcement.
02
Page Announcement Duration
This timer sets the maximum length of
Page announcements.(Affects External
Paging only)
04
Privacy Release Time
Once the user initiates a Meet-Me Confer-
ence or Voice Call Conference, the
system waits this time for the Paged party
to join the call.
Programming Manual

Program 31 : Paging Setup

Key for Entering Names
Enter characters:
Enter characters: A-C, a-c, 2.
Enter characters: D-F, d-f, 3.
Enter characters: G-I, g-i, 4.
Enter characters: J-L, j-l, 5.
Enter characters: M-O, m-o, 6.
Enter characters: P-S, p-s, 7.
Enter characters: T-V, t-v, 8.
Enter characters: W-Z, w-z, 9.
Enter characters:
# = Accepts an entry (only required if two letters on the same key are needed - ex: TOM).
Pressing # again = Space. (In system programming mode, use the right arrow soft key instead
to accept and/or add a space.)
Clear the character entry one character at a time.
Clear all the entries from the point of the flashing cursor and to the right.
Up to 12
Characters
0~64800
(sec)
0~64800
(sec)
When you want to. . .
Input Data Default
GRP ALL
1200
90
SL1000
Program
31
Related Program
11-12-19
31-02-02
2-293