Program 45 : Voice Mail Integration; Voice Mail Integration Options - NEC SL1000 Programming Manual

Issue 0.1
Level
IN
Description
Use Program 45-01 : Voice Mail Integration Options to customize certain voice mail integration
options.
Input Data
I e t m N . o
01
Voice Mail Department Group Number
Assign which Extension (Department) Group
number is to be assigned as the voice mail group.
02
Voice Mail Master Name
Enter the Voice Mail Master Name.
03
Voice Mail Call Screening
Enable/disable the ability to process the Call
Screening commands (1+ extension number) sent
from the Voice Mail.you should normally enable
this option to allow for Voice Mail Call Screening.
Disable this option if your system has been
modified so that extensions begin with the digit
1(e.g., 101,102, etc.). Also see the "Flexible
System Numbering" feature.
04
Park and Page
Enable/disable the system ability to process the
Voice Mail Park and Page (
should normally enable this option.
05
Message Wait
Enable/disable the system ability to process the
Voice Mail Message Wait (#) commands. You
should normally enable this option. If enabled, be
sure that the programmed Message Notification
strings don't contain the code for trunk access.
06
Record Alert Tone Interval Time
This time sets the interval between Voice Mail
Conversation Record alerts.
10
New NSL Protocol support
11
Prefix for Call Screening
12
Prefix for Park and Page
13
Prefix for Message Wait
14
CCIS Centralized Voice Mail Number
Assign the pilot number to Centralized Voice Mail
over CCIS Link. This is assigned only in the
remote switches.
15
Analog Voice Mail Protocol Selection
Assigns whether fixed codes are used or the
codes used in PRG 45-04 are used for analog
voice mail protocol.
16
Voice Mail Fax Digit Add Assignment
Assign up to four digits in front of the station
number sent to the SLT port when a call is
forwarded.
17
Reply Mailbox Number
Whether or not to include the mailbox number in
the analog voice mail protocol.
Programming Manual

Program 45 : Voice Mail Integration

45-01 : Voice Mail Integration Options

I e t m
0~32
0 = No Voice Mail
Up to 12 Characters
0 = Off
1 = On
0 = Off
1 = On
*
) commands. You
0 = Off
1 = On
0~64800 (sec)
0 = Off
1 = On
Dial (One digit)
Dial (One digit)
Dial (One digit)
Dial (up to four digits)
0: Fixed
1: Program
Up to four digits
0: No
1: Yes
n I p t u D a a t D e a f u
0
V.M.
1
1
1
30
0
1
*
#
No Setting
0
No Setting
1
SL1000
Program
45
t l R e a l e t d P R G
45-01-11
45-01-12
45-01-13
45-01-03
45-01-04
45-01-05
45-04
11-11-50/51
15-03-16
45-04
2-349