Class Of Service Options For Disa/E&M - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Use Program 20-14 : Class of Service Options for DISA/E&M to enable/disable DISA and tie line
Program
Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09. Assign
tie line Classes of Service in 34-02. Up to 15 DISA/E&M Classes of Service can be defined.
20
Analog trunk-to-analog trunk and ISDN trunk-to-ISDN trunk calls are supported by this program. How-
ever, analog trunk-to-ISDN trunk and ISDN trunk-to-analog trunk calls are NOT supported by this
program.
Input Data
Item No.
01
02
03
04
05
06
07
08
09
2-160
Program 20 : System Option Setup
20-14 : Class of Service Options for DISA/E&M
Class of Service Number
Item
First Digit Absorbtion (Delete First Digit Di-
aled)
For tie lines, enable or disable the ability to absorb
(ignore) the first incoming digit. Use this to make
the tie trunk compatible with 3- and 4-digit tie line
service. This option does not apply to DISA.
Trunk Group Routing/ARS Access
This option enables or disables a DISA or tie trunk
caller ability to dial 9 for Trunk Group Routing or
Automatic Route Selection (ARS).
Trunk Group Access
This option enables or disables a DISA or tie trunk
caller ability to access trunk groups for outside
calls (Service Code 804).
Outgoing System Speed Dial
This option enables or disables a DISA or tie trunk
caller ability to use the System Speed Dialing.
Operator Calling
This option enables or disables a DISA or tie trunk
caller ability to dial 0 for the telephone system
operator.
Internal Paging
This option enables or disables a DISA or tie trunk
caller ability to use the telephone system Internal
Paging.
External Paging
This option enables or disables a DISA or tie trunk
caller ability to use the telephone system External
Paging.
Direct Trunk Access
This option enables or disables a DISA or tie trunk
caller ability to use Direct Trunk Access (Service
Code 805).
Forced Trunk Disconnect <Not for ISDN
T-point>
This option enables or disables a tie trunk caller
ability to use Forced Trunk Disconnect (Service
Code 724). This option is not available to DISA
callers.
01~15
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
Program 20 : System Option Setup
Issue 0.1
Default
COS 01~15
0
0
0
0
0
0
0
0
0