Program 35 : Smdr Account Code Setup; Smdr Options - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Use Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording) options
Program
for each of the eight SMDR ports. Refer to the following chart for a description of each option, its range
and default setting.
35
Input Data
I e t m N . o
01
02
03
04
05
06
07
08
Conditions
None
Feature Cross Reference
• Station Message Detail Recording
2-320

Program 35 : SMDR Account Code Setup

SMDR Port Number
I e t m
Output Port Type
This option specifies the type of connection used for
SMDR. The baud rate for the COM port should be
set in Program 10-21-02 or 15-02-19.
Output Destination Number
This option specifies the SMDR printer output exten-
sion (CTA/CTU extension number).
Header Language
Specify the language in which the SMDR header
should be printed.
Omit Digits
The number of digits entered in this option do not
print on the SMDR report. For example, if the entry
is 10, the first 10 digits a user dials do not appear on
the SMDR report.
Minimum Digits
Outgoing calls must be at least this number of digits
for inclusion in the SMDR report.
Minimum Call Duration
The duration of the call must be at least this time to
be included on the SMDR report.
Minimum Ring Time (For Incoming Calls)
A call must ring for at least this time to be included
on the SMDR report.
Format Selection

35-01 : SMDR Options

1~2
n I p t u D a a t
0 = None
1 = --Reserve--
2 = --Reserve--
3 = LAN
4 = --Reserve--
Up to four digits
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
0~24 (0 = Not applied)
0~24 (0 = Not applied)
0~65535 (sec) (0 = All)
0~65535 (sec) (0 = All)
0 = Format1 Type (North America)
1 = Format2 Type (Overseas)
Program 35 : SMDR Account Code Setup
Issue 0.1
D e a f u t l
3
No Setting
0
0
0
0
0
1