NEC SL1000 Programming Manual page 173

Issue 0.1
Item No.
14 Trunk-to-Trunk Transfer Restriction
Turns off or on the Trunk-to-Trunk Transfer
Restriction. If enabled, Trunk-to-Trunk
Transfer is not possible.
15 VRS Personal Greeting (Message Greet-
ing)
Turns off or on a Service Code to record,
listen to, or erase the Personal Greeting
Message.
16 Call Redirect
Turns off or on a multiline terminal user ability
to transfer a call to a predefined destination
(such as an operator, voice mail, or another
extension) without answering the call.
17 Department Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
Turns off or on an extension user ability to set
Trunk-to-Trunk Forwarding for a Department
Group.
18 No Recall
No Recall set to "Allow" (1) will not stop trans-
ferred calls from recalling from a virtual
extension.
19 Hold/Extended Park
Determine if an extension Class of Service
should allow either a normal or extended
Park.
20 No Callback
Turns off or on an extension to receive
callbacks.
21 Restriction for Tandem Trunking on Hang
Up
Allow (0) or Deny (1) an extension user ability
to set up a tandem/conference call automati-
cally when they hang up.
22 Restricted Unsupervised Conference
Allow (0) or Deny (1) an extension ability to
initiate an unsupervised conference.
23 VE Call Forward Set/Cancel
Turn on or off an extension ability to set or
cancel call forwarding for a virtual extension.
24 Trunk Park Hold Mode
Set the hold type when a trunk call is put on
hold by an extension.
25 Transfer Park Call
Turn off or on an extension ability to transfer a
parked call.
26 Station Park Hold mode
27 Call Park Automatically Search
28 Both Ring Enhancement
Conditions
None
Feature Cross Reference
Class of Service
Programming Manual
Item
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Allow
1 = Deny
0 = Allow
1 = Deny
0 = Off
1 = On
0 = Non Exclusive Hold (Off)
1 = Exclusive Hold (On)
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Normal
1 = Enhanced
Input Data
COS 01~15
SL1000
Default
0
1
Program
0
20
1
0
0
0
0
0
0
0
0
0
1
0
2-153