Firmware Update Time Setting - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
(This program is available only via telephone programming and not through PC Programming).
Program
Use Program 90-36 : Firmware Update Time Setting to define the data for the firmware update
90
feature. This data is available to set for the WebPro/PC Programming FW update feature. A compact
flash card must be inserted in the CPU for this feature.
The following firmware is available to update with this feature:
• main.bin
• Dspdbu.bin
• dsp.bin
Input Data
Item No.
Firmware Update Sched-
01
ule Time
02
Update mode
03
Update Report
Sample Report
Result
Update Success
Update Fail
Update Fail
Update Fail
Conditions
None
Feature Cross Reference
None
2-522
Program 90 : Maintenance Program

90-36 : Firmware Update Time Setting

Item Input Data
Year: 0~99
Month: 0~12
Day: 00~31
Hour: 00~23
Minute: 00~59
0 = Non Active
1 = Activated
256 characters max.
Update Success
Update is fail. Since 'A' drive is not avaiable.
Update is fail. Since main up is not exist on A drive.
Update is fail. Since Time isexpired.
Default Description
Set the time to update the firmware
0
using a compact flash card.
0
Time registration fails if an expired
time is registered.
0
0
0
Activate the Firmware Update fea-
0
ture. If this setting is 1, new firmware
on the compact flash card updates
according to the setting at 90-36-01.
Output a report when the update is
-
executed and saves one copy on the
system.If a new update occurs, the
new report overwrites the old report.
Refer to the Sample Report
this page below.
Report Display
Program 90 : Maintenance Program
Issue 0.1
on