Program 16 : Department Group Setup; Department Group Basic Data Setup - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Program
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each depart-
ment group. There are 32 available Department Groups.
16
Input Data
I e t m N . o
01
Department Name
02
Department Calling Cycle
Use this option to set the call routing
for Department Calling. Routing can
be either circular (cycles to all phones
in group) or priority (cycles to highest
priority extensions first).
03
Department Routing when Busy
(Auto Step Call)
se this option to set how the system
routes an Intercom call to a busy
Department Group member. Intercom
callers to the extension can either
hear busy or route to the first avail-
able department number. This only
occurs for calls to the extension
directly, not the department number
assigned in Program 11-07.
04
Hunting Mode
Use this option to set the action taken
when a call reaches the last extension
in the Department Group (0 = hunting
stopped, 1 = hunting repeats with
circular routing through the Depart-
ment Group).
05
Extension Group All Ring Mode
Operation
Determine whether calls ringing a
Department Group should ring all
extensions in the group simultane-
ously automatically or manually when
using the service code defined in
Program 11-12-09.
06
STG Withdraw Mode
07
Call Recall Restriction for STG
Determine whether or not an unan-
swered call transferred to a
Department Group should recall the
extension from which it was
transferred.
2-132

Program 16 : Department Group Setup

16-01 : Department Group Basic Data Setup

Department Group Number
I e t m
When set to (1) Auto-
matic, only ICM Calls
and DID Calls will ring
all the stations in the
Department Group.
n I p t u D a a t
Maximum 12 characters
0=Normal Routing (Priority)
1=Easy - UCD Routing (Circular)
0=Normal (Intercom caller to busy
department member hears busy)
1=Circular (Intercom callers to
busy department member routes
to idle member)
0=Last extension is called and
hunting is stopped
1=Circular
0=Manual (Service Code)
1=Automatic
0= Disable (Camp On)
1= Enable (Overflow Mode)
0=Disable (Recall)
1=Enable (No Recall)
Program 16 : Department Group Setup
Issue 0.1
1~32
D e a f u t l R e a l e t d P r - o
gram
No setting 11-07
0 16-02
0 16-02
0
0 11-16-10
0
0