Sip Server Information Setup - NEC SL1000 Programming Manual

Issue 0.1
Program 10 : System Configuration Setup
Level
SA
Description
Use Program 10-29 : SIP Server Information Setup to define the SIP Proxy setup for
outbound/inbound. The 10-29 commands are not used in non-registration mode.
If entries are made in Program 10-29-xx for a SIP Server and the SIP Server is then removed or not used,
the entries in Program 10-29-xx must be set back to their default settings. Even if 10-29-01 is set to 0 (off),
the SL1000 still checks the settings in the remaining 10-29 programs.
Input Data
Item No.
01 Default Proxy (Outbound)
This sets whether the SIP message is always sent
through the Default Proxy.
02 Default Proxy (Inbound)
Need to be registered in registration mode.This sets
whether the SIP message is always received
through the Default Proxy.
03 Default Proxy IP Address
This is optional and used if the provider gives you a
proxy address that is different than the registration
address. If the provider is using domain names
instead of IP addresses, leave this at default.
04 Default Proxy Port Number
The port number of the Default Proxy is set.
05 Registrar Mode
The mode registered in the registration server is set.
06 Registrar IP Address
IP address of the SIP registration server is set.
07 Registrar Port Number
The port number of the SIP registration server is
set.
08 DNS Server Mode
This setting determines if the DNS server is used.
09 DNS Server IP Address
If 10-29-08 is 1, this is effective. This sets the IP
address of the DNS server.
10 DNS Port Number
If 10-29-08 is 1, this is effective. This sets the port
number of the DNS server.
11 Registrar Domain Name Registrar Domain Name
This sets the domain name of the registration
server.
12 Domain Name
This specifies the domain name of the SIP server.
13 Proxy Host Name
This specifies the host name of the SIP server.
Programming Manual

10-29 : SIP Server Information Setup

Item
0 = Off
1 = On
0 = Off
1 = On
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0 ~ 65535
0 = None
1 = Manual
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0 ~ 65535
0 = Off
1 = On
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0 ~ 65535
Up to 128 Characters
Up to 64 Characters
Up to 48 Characters
Input Data Default
0.0.0.0
0.0.0.0
0.0.0.0
SL1000
Program
10
0
0
5060
0
5060
0
53
None
None
None
2-33