Slot Control - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
(This program is available only via telephone programming and not through PC Programming).
Program
Use Program 90-05 : Slot Control to reset or delete (uninstall) units (slots 1~24).
90
Delete allows you to completely uninstall the unit. You should do this if you want to remove a unit and
plug it into a different slot and still retain the port assignments. If a different type of interface unit is
being installed in a slot previously used (e.g., changing from a LCA to an DLCA unit), the slot should
be deleted (option 1) first before installing the new interface unit.
Reset allows you to send a reset code.
Input Data
Item No.
01
Conditions
• When you delete or reset a unit, you must first remove it from its slot then run Program 90-05.
When reusing the slot for another unit, you must plug the unit in or reset the system before the
system can use the slot again.
• When you delete or reset a unit, all related programming in Program 10-03-01 is set back to de-
fault.
Feature Cross Reference
None
2-492
Program 90 : Maintenance Program
System ID
Menu Number
Item

Slot Control

90-05 : Slot Control
Not Used
1 = Delete
2 = Reset
3 = Set Busy Out
4 = Reset Busy Out
Input Data
Slot Number (0~16 0 = No Settting)
Program 90 : Maintenance Program
Issue 0.1