NEC SL1000 Programming Manual page 379

Issue 0.1
I e t m N . o
06
Message Retention
Use this option to determine how long a Subscriber
Mailbox retains held and saved messages. If a
message is left in a Subscriber Mailbox longer than
this interval, InMail deletes it.
07
Recording Conversation Beep
(Rec Conv Beep)
Use this option to enable or disable the Conversa-
tion Record beep. If enabled, all parties on a call
hear the voice prompt "Recording", followed by a
single beep when the extension user initiates
Conversation Record. If disabled, the voice prompt
and beep do not occur. When you disable the
Conversation Record beep, the following voice
prompts do not occur while InMail records the
conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity is
reached)
You have reached the recording limit
(if the recorded message is too long)
Provides an additional Conversation Record beep.
This beep repeats according to the setting of
Program 45-01-06: Voice Mail Integration
Options: Record Alert Tone Interval Time
(0~64800 seconds). To disable the Conversation
Record beep, enter 0 for this option.
08
Message Waiting Lamp
(Update MW Lamp)
Use this option to enable or disable Message
Waiting lamping at the extension associated with the
Subscriber mailbox. For Subscriber Mailboxes, you
should leave this option enabled. For Guest Mail-
boxes, you should leave this option disabled.
09
Auto Attendant Direct to Voice Mail
(Auto-ATT DND)
Use this option to enable or disable Auto Attendant
Do Not Disturb. When a subscriber enables Auto
Attendant Do Not Disturb, an Automated Attendant
caller routes directly to the mailbox, hears the
greeting, and is asked to leave a message. A
subscriber can also enable Auto Attendant Do Not
Disturb while recording their mailbox greeting.
10
Forced Unscreened Transfer
(Forced UTRF)
Use this option to enable or disable Automated
Attendant Forced Unscreened Transfer for the
Subscriber Mailbox. If enabled, each Screened
Transfer (TRF) to the extension is converted to an
Unscreened Transfer (UTRF). If disabled, Screened
Transfers from the Automated Attendant occur
normally.
11
Auto Time Stamp
Use this option to enable or disable Auto Time
Stamp for the Subscriber Mailbox. If enabled, after
the subscriber listens to a message InMail
announces the time and date the message was left.
Auto Time Stamp also announces the message
sender (if known).
A subscriber can also enable Auto Time Stamp from
their mailbox.
12
System Administrator
Use this option to designate the Subscriber Mailbox
as a System Administrator. This allows the
subscriber to use the SA options after logging onto
their mailbox.
Programming Manual
I e t m
0~99 Days
0 (Indefinite)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
n I p t u D a a t D
Mailbox 1 (200)=1
Other mailboxes=0
SL1000
e a f u t l
0
1
Program
47
1
0
0
0
2-359