Load Data - NEC SL1000 Programming Manual

Issue 0.1
Level
SA
Description
(This program is available only via telephone programming and not through PC Programming).
Use Program 90-04 : Load Data to load the system data from the inserted USB Flash Drive to the
SRAM and Flash ROM in the system.
Input Data
Item No.
01

Load Data

Conditions
• After uploading the programming, reset the system and wait a few minutes for the system to reset
completely before accessing any line or special system feature. Otherwise, some unusual LED
indications may be experienced.
Feature Cross Reference
None
Programming Manual
Program 90 : Maintenance Program
Item
Dial 1 + press Hold (Press Hold only to cancel.)
90-04 : Load Data
Input Data
SL1000
Program
90
2-491