NEC SL1000 Programming Manual page 395

Issue 0.1
Item Item
No.
03
Default Mailbox Category
(Default MB Ctg)
Use this option to specify the category
of mailbox used as the Default
Mailbox. InMail mailbox categories are
Subscriber Mailbox, Master Mailbox,
and Routing Mailbox. InMail uses the
Default Mailbox when an Answer
Schedule is not in effect.
InMail handles the routing according to
the type of mailbox (Subscriber, Call
Routing, or Announcement) within the
specified category:
•
If the Default Mailbox is a
Subscriber Mailbox, the outside
caller hears the mailbox greeting
(if recorded) and can leave a
message.
• If the Default Mailbox is an
Announcement Mailbox, the
outside caller hears the recorded
announcement. Depending on
how the Announcement Mailbox
is programmed, InMail then
hangs up, reroutes the call, or
provides additional dialing
options.
• If the Default Mailbox is a Call
Routing Mailbox, the outside
caller hears the instruction menu
and can dial any option allowed
by the associated Dial Action
Table.
If any oft he Input Data
values are entered, the
terminal displays the
Override Mailbox Num-
ber selection (below). If
any oft he Input Data
values are entered, the
terminal displays the
Override Mailbox Num-
ber selection (below).
Default Mailbox Number
(Default MB Num)
Use this option to set the Answer Table
Default Mailbox number. InMail uses
the Default Mailbox when an Answer
Schedule is not in effect. By default,
this occurs at all times other than
Monday through Friday from 8:30 AM
to 5:00 PM.
04
Next Answer Table
When 10 Answer Schedules in an
Answer Table are not sufficient, use
this option to link two Answer Tables
together. InMail treats the two linked
tables as a single 20 entry Answer
Table.
Conditions
None
Programming Manual
Input Data Default
0 (Undefined) Answer Table
1 (Subscriber Mailbox - 1 = 3
STA) Answer Table
2 (Group Mailbox) 2~8 = 0
3 (Routing Mailbox)
Digits (Three maximum, Answer Table
using 0~9) 1 = 1
Answer Table
2~8 = No
Entry
Answer Table (1~8)
0 = Undefined
SL1000
Description
Category 0 = Skip Mailbox No.
setting
Category 1 = Mailbox No.
should be 1-128. refer to
<PRG47-02>
Category 2 = Mailbox No.
should be 1-32. refer to
<PRG47-03>
Category 3 = Mailbox No.
should be 1-32. refer to
<PRG47-07>
Category 0 = Skip Mailbox No.
setting
Category 1 = Mailbox No.
should be 1-128. refer to
<PRG47-02>
Category 2 = Mailbox No.
should be 1-32. refer to
<PRG47-03>
Category 3 = Mailbox No.
should be 1-32. refer to
<PRG47-07>
0
Program
47
2-375