Trunk Access Map Setup - NEC SL1000 Programming Manual

Issue 0.1
Level
IN
Description
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an exten-
sion access options for trunks. For example, an extension can place only outgoing calls on trunks to
which it has outgoing access. There are 126 Access Maps with all 126 trunk ports programmed in Map
1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06 to assign Trunk
Access Maps to extensions. Each trunk can have one of eight access options for each Access Map.
Emegerncy calls will override Program 14-07 settings.
Input Data
Access Map Number
Trunk Port
Item No.
Number
01 001~126
Default
Access map No.
1
2
:
126
Programming Manual
Program 14 : Trunk, Basic Setup

14-07 : Trunk Access Map Setup

0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on Hold
4 = Outgoing access and access when trunk on Hold
5 = Incoming access and access when trunk on Hold
6 = Incoming and Outgoing access
7 = Incoming access, outgoing access and access when trunk on Hold
Trunk Port No.
1
2
:
126
1
2
:
126
1
2
:
126
1
2
:
126
001~126
Input Data
Default
7 (T, R, H)
7 (T, R, H)
:
7 (T, R, H)
0 (No access)
0 (No access)
:
0 (No access)
0 (No access)
0 (No access)
:
0 (No access)
0 (No access)
0 (No access)
:
0 (No access)
SL1000
Program
14
2-95