NEC SL1000 Programming Manual page 384

SL1000
I e t m N . o
06
07
Program
47
08
09
10
11
12
13
14
15
16
2-364
I e t m
Message Waiting Lamp
(Update MW Lamp)
Use this option to enable or disable Message
Waiting light at the extension associated with the
Subscriber mailbox. For Subscriber Mailboxes, you
should leave this option enabled. For Guest Mail-
boxes, you should leave this option disabled.
Auto Attendant Direct to VoiceMail
Use this option to enable or disable Auto Attendant
Direct to VM. When a subscriber enables Auto
Attendant Direct to VM, an Automated Attendant
caller routes directly to the mailbox, hears the
greeting, and is asked to leave a message. A
subscriber can also enable Auto Attendant Direct to
VM while recording their mailbox greeting.
Forced Unscreened Transfer
(Forced UTRF)
Use this option to enable or disable Automated
Attendant Forced Unscreened Transfer for the
Subscriber Mailbox. If enabled, each Screened
Transfer (TRF) to the extension is converted to an
Unscreened Transfer (UTRF). If disabled, Screened
Transfers from the Automated Attendant occur
normally.
Auto Time Stamp
Use this option to enable or disable Auto Time
Stamp for the Subscriber Mailbox. If enabled, after
the subscriber listens to a message InMail
announces the time and date the message was left.
Auto Time Stamp also announces the message
sender (if known).
A subscriber can also enable Auto Time Stamp from
their mailbox.
System Administrator
(System Admin)
Use this option to designate the Subscriber Mailbox
as a System Administrator. This allows the
subscriber to use the options after logging onto their
mailbox.
Dialing Option
Dialing Option provides additional dialing options for
Next Call Routing Mailbox calls (see Next Call
Routing Mailbox below). If enabled, a caller who
accesses the Subscriber Mailbox to leave a
message can dial any option in the Next Call
Routing Mailbox Dial Action Table. If disabled, the
caller can dial only 0 (to use the Next Call Routing
Mailbox 0 action).
Next Call Routing Mailbox
(Next CR Mbox)
Use this option to assign a Next Call Routing
Mailbox to the Subscriber Mailbox. This provides
callers with additional dialing options while listening
to a Subscriber Mailbox recorded or default
greeting. The digits the caller can dial depends on
the setting of the Next Call Routing Mailbox and
Alternate Next Call Routing Mailbox options.
Directory List Number
Specify the Directory List number to which the
Group Mailbox belongs.
Voice Prompt Language
Enable Paging
Paging Option
n I p t u D a a t
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0~32
( 0 = Undefined)
0 = None
1~8 = List Number
*
= All
Refer to 47-06-14 Default Table
p a g e 2-365.
0 = No
1 = Yes
0 = RNA
1 = Immediate
Program 47 : InMail
Issue 0.1
D e a f u t l
1
0
0
0
0
0
1
(Call Routing
Mailbox 01)
By default, Call
Routing Mailbox
numbers are
01=16.
0
on
2
0
0