NEC SL1000 Programming Manual page 342

SL1000
Item No.
12
13
14
Program
35
15
16
17
18
19
20
21
22
23
Conditions
None
Feature Cross Reference
Station Message Detail Recording
2-322
Item
DID Table Name Output
Determine if the DID table name should be
displayed.
CLI Output When DID to Trunk
Determine if the CLI output should be displayed
for DID.
Date
Determine whether or not the date should be
displayed on SMDR reports.
This option must be set to 0 if the
trunk name is set to be displayed
in Program 35-02-03.
CLI/DID Number Switching
Determine whether or not the CLI/DID Number
Switching should be displayed.
Trunk Name or Received Dialed Number
Determine how the SMDR should print incoming
calls on ANI/DNIS or DID trunks. If set to (1),
ANI/DNIS trunks can print DNIS digits. If set to
(0) trunk names are printed instead.
Print Account Code or Caller Name of Incom-
ing Call
Determine if SMDR should print Account Code or
Caller Name of Incoming Call.
Print Mode for Caller Name of Incoming Call
Determine how SMDR should print Caller Name
of Incoming Call.
Dialed Number Output Format
Determine if the dialed number should display
from the first digits or from the last digits. This
option is only available for outgoing calls.
External Information CFW Mode
Determine which information is displayed in the
"STATION" area for a transferred call when the
extension has Call Forward set with an Abbrevi-
ated Dial number as the destination. Selecting
"0" (Transfer Info) will display the extension
number which called the extension with external
Call Forward set. Selecting "1" (Incoming Info)
will display the extension number which has the
external Call Forward set.
This option only applies when Call Forward is set
using a service code (Program 11-11-01~11-
11-07) and the destination uses an Abbreviated
Dial bin. It does not include Off-Premise or
Centrex transfers.
S-Point Terminal Number
Security Auto Dialing
Watch Auto Dialing
Input Data
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = CLI (CLIP)
1 = DID Calling Number
2 = Calling Party Name
0 = Trunk Port Name
1 = Received Dialed Number
2 = Both
0 = ACC
1 = CNAME
0 = Normal
1 = Line Feed
0 = Display from the first digit
1 = Display from the last digit
0 = Transfer Information
1 = Incoming Information
0 = MSN Number
1 = Extension Number
0 = Not Output
1 = Output
0 = Not Output
1 = Output
Program 35 : SMDR Account Code Setup
Issue 0.1
Default
0
0
0
0
0
0
0
0
0
0
1
1