Inmail Station Mailbox Options - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Use 47-02 : InMail Station Mailbox Options to set up a station/extension mailbox. Station mailboxes
Program
are automatically assigned as Subscriber Mailboxes. Normally, InMail Station Mailbox numbers 1~26
should correspond to extensions 200~225.
47
Station Mailboxes are one oft hree mailbox categories: Station, Routing, or Master. You can also set
up Master Mailboxes as Subscriber Mailboxes.
Input Data
I e t m N . o
01
02
03
04
05
2-358

47-02 : InMail Station Mailbox Options

Station Mailbox Number
I e t m
Mailbox Type
Use this option to enable or disable the mailbox. An
extension mailbox is not accessible when it is
disabled (even though its stored messages and
configuration are retained in memory.) If disabled, a
user pressing Message initiates a remote logon and
is asked to enter their mailbox number. A voice
prompt then announces: "That mailbox does not
exist".
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 200.
Mailbox Number
Use this option to select the extension number asso-
ciated with the mailbox you are programming.
Normally, mailbox 1 should use Mailbox Number
200, mailbox 2 should use Mailbox Number 201,101
etc.
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 200.
Number of Messages
Use this option to set the maximum number of
messages that can be left in the Subscriber Mailbox.
If a caller tries to leave a message after this limit is
reached, they hear: "That mailbox is full". VM8000
InMail then hangs up.
Message Playback Order
Use this option to set the Subscriber Mailbox
message playback order. When a subscriber listens
to their messages, VM8000 InMail can play the
oldest messages first (first-in/first-out, or FIFO), or
the newest messages first (last-in/first-out, or LIFO).
Auto Erase/Save of Messages
Use this option to determine what happens when a
Subscriber Mailbox user completely listens to a new
message and then exits the mailbox without either
saving (SA) or erasing (E) the message. Depending
on the setting of this option, InMail either automati-
cally saves or erases the message. If the mailbox
user hangs up before listening to the entire new
message, InMail retains the message as a new
message.
Program 47 : InMail
1~128
n I p t u D a a t
0 = None
1 = Personal
2 = Group
Up to four digits
Mailbox 2~64= 201~263
0~99 messages
To conserve storage space,
enter 0 for all unused
mailboxes.
0 (FIFO = first-in/ first-out, or
oldest messages first).
1 (LIFO = last-in/ first-out, or
newest messages first)
0 = Erase
After the subscriber listens to
the entire new message and
hangs up, VM8000 InMail
erases the message.
1= Save
After the subscriber listens to
the entire new message and
hangs up, VM8000 InMail
saves the message.
Program 47 : InMail
Issue 0.1
D e a f u t l
1
Mailbox 1 = 200
Mailbox 65~ = No
Setting
99 for mailbox 1
20 for all other mail-
boxes
0
1