Section 5 Using Keys To Move Around In The Programs - NEC SL1000 Programming Manual

Issue 0.1
2 Press Speaker. If changes were to the system programming, "Saving System Data" is displayed.
3 The display shows "Complete Data Save" when completed and exits the telephone to an idle
mode.
To save a customer's database, a blank Compact Flash (CF) Card is required. Insert the CF Card into the
CPU and, using Program 90-03, save the so ware to the CF Card. (Program 90-04 is used to reload the
customer data if necessary.) Note that a CF Card can only hold one customer database. Each database to
be saved requires a separate drive.
S 5 USING KEYS TO MOVE AROUND IN THE
ECTION
PROGRAMS
Once you enter the programming mode, use the keys in the following chart to enter data, edit data and
move around in the menus.
Use this key...
*
0~9 and
Hold
Clear/Back
Flash
DND/CONF
Mute
Programming Manual
CF card
Table 1-1 Keys for Entering Data
Keys for Entering Data
When you want to...
Enter data into a program.
Complete the programming step you just made (e.g., pressing Enter on a PC keyboard). When
a program entry displays, press Hold to bypass the entry without changing it.
Delete the entry to the left (e.g., pressing Backspace on a PC keyboard).
Delete or clear all characters to the right of the cursor.
Exit one step at a time from the program window currently being viewed.
For example, if programming item 5 in 15-03, pressing DND/CONF allows you to enter a new
option in program 15-03. Pressing DND/CONF again allows you to select a new program in the
15-XX series. Pressing Answer a third time allows you to enter a new program beginning with
1. Pressing DND/CONF one last time brings you to the beginning program display, allowing
you to enter any program number.
Switch between the different input data fields by pressing Mute. The cursor moves up to the
top row of the display. Pressing Mute again moves the cursor back to the middle row.
Scroll backward through a list of entry numbers (e.g., from extension etc.) or through entries in
a table (e.g., Common Permit Table).
If you enter data and then press this key, the system accepts the data before scrolling forward.
Scroll forward through a list of entry numbers (e.g., from extension etc.) or through entries in a
table (e.g., Common Permit Table).
If you enter data and then press this key, the system accepts the data before scrolling
backward.
CPU card
CF Slot (CN2)
PZ-VM21
SL1000
1-3