System Options For Multiline Telephones - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
Program
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
20
Input Data
Item
No.
01
Trunk Loop Key Operation
Mode
02
Trunk Group Access Key
Operating Mode
Use this option to set the
operating mode of the exten-
sion trunk group keys. The
keys are for incoming access,
outgoing access, or both.
04
Retrieve the Line After
Transfer
Enable (1) or disable (0) an
extension ability to answer a
call after it has been trans-
ferred, but before it is
answered.
05
Headset Busy Mode
Set the conditions under
which a headset extension is
busy to incoming callers.
06
Preselection Time
When a multiline terminal user
preselects a line key, the
system remembers the prese-
lection for this time.
07
Time and Date Display
Mode
Set how the Time and Date
appear on display telephones.
There are eight display
modes.
08
LCD Display Holding Time
09
Disconnect Supervision
Use this option to enable or
disable disconnect supervi-
sion for the system trunks.
2-138
Program 20 : System Option Setup

20-02 : System Options for Multiline Telephones

I e t m
0=Keep Lamp
1=Extinction
Mode
Incoming:
Talking:
Holding:
0=Outgoing / Incoming
1=Outgoing
2=Incoming
0=Not Holding (No Keep)
1=Holding (Keep)
0 = No (Disable)
1 = Yes (Enable)
0~64800s
1~10
Type 1 = (12 hour) 10 MAR TUE 3:15PM
Type 2 = (12 hour) 3:15PM MAR 10 TUE
Type 3 = (12 hour) 3-10 TUE 3:15 PM
Type 4 = (12 hour) 3:15PM TUE 10 MAR
Type 5 = (24 hour) 10 MAR TUE 15:15
Type 6 = (24 hour) 15:15 MAR 10 TUE
Type 7 = (24 hour) 3-10 TUE 15:15
Type 8 = (24 hour) 15:15 TUE 10 MAR
0~64800 (sec)
0 = Disable (Off)
1 = Enable (On)
n I p t u D a a t
0 = Keep Lamp 1 = LED Off
300 IPM Red blink
GreenLighting (on LED Off
Talking TEL)
60 IPM Green blink LED Off
(on hold-ing TEL)
Program 20 : System Option Setup
Issue 0.1
D e a f u t l R e a l e t d
Program
0
0
0
0 20-09-07
5
1
5
1