Copy Program By Port Number - NEC SL1000 Programming Manual

SL1000
Level
IN
Description
(This program is available only via telephone programming and not through PC Programming).
Program
Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each
92
outside line.
Input Data
Item No.
01
02
03
Program that can be copied is same as <PRG92-01>
Conditions
None
Feature Cross Reference
None
2-552

92-03 : Copy Program by Port Number

Program Number
Item
Source Number
Enter the port number from where the data is to be copied.
Destination Number (From)
Enter the first port number to where the information is to be
copied
Destination Number (To)
Enter the last port number to where the information is to be
copied. If the information is to be copied only to one port, enter
the information entered in the Destination Number (From) entry.
Program 92 : Copy Program
Issue 0.1
XX-XX
Input Data
• For Trunk Base : Trunk Port
Number
1~142
• For Trunk Group Base : Trunk
Group Number 1~25
• For Extension Number :
1~128
Including Virtual Extension :
1~178
• For Department Group Base :
Department Group Number 1~32
• For DSS : (DSS Console Number
1~12
Program 92 : Copy Program