Class Of Service Options (Incoming Call Service) - NEC SL1000 Programming Manual

Issue 0.1

20-09 : Class of Service Options (Incoming Call Service)

Level
IN
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming call
feature availability for each extension Class of Service (COS).
Input Data
C a l s s f o S e v r
Item No. Item
01 Second Call for DID/DISA/DIL/
E&M Override
Turns off or on the extension ability
to receive a second call from a
DID, DISA, DIL, or tie line caller.
With this option set
to 1, the destination
extension must be
busy for a second
DNIS caller to ring
through. If the destin-
ation extension does
not have a trunk key
available for the
second call and a pre-
vious call is ringing
the extension but has
not yet been answered,
the second caller hears
busy regardless of this
program setting.
02 Caller ID Display
Turns off or on the Caller ID
display at an extension.
03 Sub Address Identification
Defines whether or not an exten-
sion displays the Caller
Sub-Address.
04 Notification for Incoming Call
List Existence
Determines whether or not an
extension display shows Check
List when an incoming call is
missed by a user.
05 Signal/Voice Call
Turn off or on an extension ability
to enable Handsfree Answerback
or Forced Intercom Ringing for
their incoming Intercom calls.
06 Incoming Time Information
Display
Programming Manual
Program 20 : System Option Setup
c i e N u m b r e
Input Data
0 = Off
1 = On
0 = Off
1 = O n
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 1 ~ 1 5
Default Related Program
COS 01-15
0
1 1 5 0 - 2
0
1 20-09-02
11-11-15,
1
11-11-16
1 20-13-06
SL1000
Program
20
0 - 8
2-149