Vrs Delayed Message For Irg - NEC SL1000 Programming Manual

Hide thumbs Also See for SL1000:
Table of Contents

Advertisement

Issue 0.1
Level
IN
Description
Use Program 22-14 : VRS Delayed Message for IRG (Incoming Group Ring) to define for each
incoming ring group the timers, VRS message number and type of tone for VRS Waiting Message.
Input Data
Incoming Ring Group Number
Item No.
st
01
1
Delayed Message Start Time
Time before the VRS Delay Message is
played for IRG.
st
02
1
Delayed Message Number
VRS message that is used for the 1st
Delayed Message.
st
03
1
Delayed Message Sending Count
This is the number of times the 1st Delay
Message is played. If set to 0, the 1st
Delay Message is not played.
nd
04
2
Delayed Message Number
VRS message that is used for the 2nd
Delayed Message.
nd
05
2
Delayed Message Sending Count
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd
Delay Message is not played.
06
Tone Kind at Message Interval
What is heard between the Delay
Message.
07
Disconnect Time After the End of VRS
Delayed Message
Time, after all 2nd Delay Messages are
played, before the caller is disconnected.
Conditions
None
Feature Cross Reference
None
Programming Manual
Program 22 : Incoming Call Setup

22-14 : VRS Delayed Message for IRG

Item
0~64800 (sec)
0~101
0 = No Message
101 = Fixed Message
0~255 (time)
0~101
0 = No Message
101 = Fixed Message
0~255 (time)
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0 = No Disconnect
0~64800 Seconds
1~25
Input Data
SL1000
Program
22
Default
0
0
0
0
0
0
60
2-239

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents