NEC SL1000 Programming Manual page 126

SL1000
I e t m N . o
21
Virtual Extension Access Mode
(when idle Virtual Extension key
pressed)
Determine whether a Virtual Extension
(VE) should function as a DSS key or a
Virtual Extension. When DSS (0) is
selected, the key functions as a DSS
key to the extension and for incoming
calls to that extension. When Outgoing
(1) is selected, the key functions as a
virtual extension and can be used for
incoming and outgoing calls. When
Program
Ignore (2) is selected, the key functions
can receive incoming calls only.
15
22
Multiple Incoming From Intercom
and Trunk
If enabled, this affects how a Hotline
key lights, based on the setting in
Program 22-01-01. If 22-01-01 is set to
1 for trunk priority, the Hotline key lights
solid when a trunk call rings in. If
22-01-01 is set to 0 for intercom priority,
the Hotline key does not light for
incoming trunk calls, but lights solid for
intercom calls.If 15-02-22 is disabled,
Hotline keys light solid for any incoming
calls regardless of the setting in
Program 22-01-01.
23
Speed Dial Preview Mode
This option defines how a speed dial
key functions when pressed. If set to
Preview (0), the speed dial number can
be previewed before dialing. If set to
Outgoing Immediate (1), the number is
dialed immediately.
27
Handset Volume
Determine how an extension handset
volume is set after it is adjusted during
a call.
29
PB Back Tone Level
This program allows adjustment of the
PB Back Tone Level when you are
calling an ISDN Line.
30
Toll Restriction Class
Select the Toll Restriction Class to use
when placing a call from a virtual
extension.
33
Multi-language calendar display on
LCD
34
Call Register Mode
The Caller ID Scroll stores Trunk calls
only (0), or both Internal and Trunk calls
(1).
35
Message Waiting Lamp Cycle for
Calling Extension
Select the cycle method that the Large
LED flashes when the extension has
set Message Waiting.
2-106
I e t m
0=DSS
1=Outgoing (OTG)
2 =Ignore
0=Disable
1=Enable
0=Preview
1=Outgoing Immediately
0=Back to Default (Back)
1=Stay at previous level (Stay)
When 1 is assigned in this
program and a user sets
the volume to maximum,
the volume is reset to a le-
vel to meet FCC standards
when the user hangs up.
1~63 (-15.5dB ~ +15.5dB)
0=Vir. Ext. (Virtual Extension Class)
1=Real Ext. (Real Extension Class)
0: Off
1: On
0 = Trunk Mode
1 = Extension/Trunk Mode
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
n I p t u D a a t D e
32 (0dB)
Program 15 : Extension, Basic Setup
Issue 0.1
a f u t l R e a l e t d P r - o
gram
2
1 22-01-01
0
1
1
0
0
7 15-02-28
15-02-36
15-02-37
15-02-38