NEC SL1000 Programming Manual page 223

Hide thumbs Also See for SL1000:
Table of Contents

Advertisement

Issue 0.1
Item
Item
No.
11
Intercom Call
Restriction
12
PBX Call
Restriction
13
Restriction of Tie
Line Calls
14
Trunk Transfer Re-
striction on
Incomplete Dial
15
Common Hold Re-
striction on
Incomplete Dial
Conditions
None
Feature Cross Reference
None
Programming Manual
Input Data
Default
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Not allow
1 = Allow
0 = Not allow
1 = Allow
Description
0
Determines if incoming
and outgoing intercom
calls are allowed.
0
Use this option to set how
the system Toll Restricts
calls over PBX trunks. If
you enable PBX Toll Re-
striction, the system
begins Toll Restriction
after the PBX access
code. The user cannot
dial a PBX extension. If
you disable PBX Toll Re-
striction, the system only
restricts calls that contain
the PBX access code.
The system does not re-
strict calls to PBX
extensions. Refer to the
PBX compatibility feature.
Make sure Program 21-
05-04 (Maximum Number
of Digits Table Assign-
ment) allows for PBX Toll
Call Dialing (normally 12
digits).
0
It chooses whether the toll
restriction of the dial set
up by 34-08 is enabled or
disabled.
0
If this program is set to 1,
you can transfer the out-
going trunk which you
dialed incompletely.
0
If this program is set to 1,
you can hold the outgoing
trunk which you dialed in
restriction check.
SL1000
Related PRG
Program
21
34-08
2-203

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents