Nec Sv9100 And Idt/Net2Phone Setup Guide; This Guide And Related Documents; Idt/Net2Phone Account; Sv9100 System Software - NEC UNIVERGE SV9100 Configuration Manual

Configuring NEC SV9100 with IDT/
Net2Phone SIP Trunking Service
NEC SV9100
S 1
ECTION
1.1
1.2
1.3
SIP Trunking Service Configuration Guide
IDT/N
AND

This Guide and Related Documents

This guide was created to assist knowledgeable vendors with
configuring the NEC SV9100 Communication Server with IDT/
Net2Phone SIP Trunking Service. It provides sample entries for the
required fields. The actual data is provided by IDT/Net2Phone when
service is activated. Questions about software and hardware
installation or other PBX configuration issues should be directed to
NEC's National Technical Assistance Center (NTAC).
For complete details on using SIP trunks with the SV9100, refer to the
SV9100 Networking Manual.
For complete details on using DID features, refer to the DID feature in
the SV9100 Features and Specifications Manual.
For details about related hardware, refer to the SV9100 System
Hardware Manual.
These manuals can be downloaded from NEC's National Technical
Assistance Center (NTAC) web site. You must have a valid dealer ID
to access the documents.

IDT/Net2Phone Account

Contact your IDT/Net2Phone representative.

SV9100 System Software

The SV9100 requires system software Version 06.00.60 or higher to
use IDT/Net2Phone service.
2P S
ET HONE ETUP
G
UIDE
1