Remote Conference Group Setup - NEC SL1000 Programming Manual

SL1000
Level
SA
Description
Use Program 20-34 : Remote Conference Group Setup to define the Remote Conference options.
Program
Input Data
20
Remote Conference Group Number
Item No.
01
02
03
04
05
Conditions
None
Feature Cross Reference
Conference, Remote
2-180
Program 20 : System Option Setup

20-34 : Remote Conference Group Setup

Item
Conference Name
Enter the name displayed at the time of a
Remote Conference. This entry will display on
the keyset LCD.
Password
Define the password of a Remote
Conference.
Define the maximum number of participants
of a Remote Conference.
Max Conference Duration
Define the maximum duration of a Remote
Conference.
When this time passes, the conference is
disconnected by the SL1000 .
End Tone Alert Time
Determine how long prior disconnecting a
Remote Conference call (based on the
maximum conference duration above) the
SL1000 should send out a beep. This is used
to warn the conference participants of the
pending disconnect.
1-4
Input Data
Up to 12 characters
4 digits Fixed
(0-9, @ = wild character)
0-32
0-64800 seconds
0-64800 seconds
Program 20 : System Option Setup
Issue 0.1
Default
Group1 = Conf1
Group2 = Conf2
Group3 = Conf3
Group4 = Conf4
Group1 = 1111
Group2 = 2222
Group3 = 3333
Group4 = 4444
8
7200
300