NEC SL1000 Programming Manual page 480

SL1000
Item No.
09
10
Program
84
11
12
13
14
15
16
17
2-460
Item
G.729 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of
G.729 is set. Jitter is the variation in the time
between packets arriving and the buffer
allows this variation to be absorbed.
Moreover, this option is adjusted with the
SL1000 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and trans-
mitted to the IP terminal. The range of IP
terminal is 10-300 (10).
G.729 Jitter Buffer - Standard
Set the average G.729 Jitter Buffer.
Moreover, this option is adjusted with the
SL1000 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and trans-
mitted to the IP terminal. The range of IP
terminal is 10-300 (10).
G.729 Jitter Buffer - Maximum
Set the maximum G.729 Jitter Buffer.
Moreover, this option is adjusted with the
SL1000 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and trans-
mitted to the IP terminal. The range of IP
terminal is 10-300 (10).
Number of G.723 Audio Frame
Maximum number of the G.723 Audio Frame
(corresponds to 5.3kbps ACELP method).
G.723 Silence Compression (VAD) Mode
If enabled, RTP packets are not sent for the
compressed silence.
G.723 Jitter Buffer - Minimum
Set the minimum value of the G.723 Jitter
Buffer.
Moreover, this option is adjusted with the
SL1000 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and trans-
mitted to the IP terminal. The range of IP
terminal is 10-300 (10).
G.723 Jitter Buffer - Standard
Set the average value of the G.723 Jitter
Buffer.
Moreover, this option is adjusted with the
SL1000 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and trans-
mitted to the IP terminal. The range of IP
terminal is 10-300 (10).
G.723 Jitter Buffer - Maximum
Set the maximum value of the G.723 Jitter
Buffer.
Moreover, this option is adjusted with the
SL1000 as it is used by both IP terminals and
the IPLA and the range of the adjustment of
Jitter for the IP terminal is narrower and trans-
mitted to the IP terminal. The range of IP
terminal is 10-300 (10).
Jitter Buffer Mode
Set the mode of the Jitter Buffer.
1 = Size set to the fixed (standard) amount for
the codec.
2 = The minimum/maximum range for the
codec is used.
3 = The minimum/maximum range for the
codec is used and adjusts at any time, regard-
less of silence.
Input Data
0-300 ms
0-300 ms
0-300 ms
1 = 30 msec
2 = 60 msec
0 = Disable
1 = Enable
0-300 ms
0-300 ms
0-300 ms
1 = static
2 = adaptive during silence
3 = adaptive immediately
Program 84 : Hardware Setup for VoIP
Issue 0.1
Default
30
60
120
1
0
30
60
120
3