Program 16 : Department Group Setup; Department Group Basic Data Setup - NEC SL1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each depart-
Program
ment group. There are 32 available Department Groups.
16
Input Data
Item No.
01 Department Name
02 Department Calling Cycle
Use this option to set the call routing
for Department Calling. Routing can
be either circular (cycles to all phones
in group) or priority (cycles to highest
priority extensions first).
03 Department Routing when Busy
(Auto Step Call)
Set this option to set how the system
routes an Intercom call to a busy De-
partment Group member. Intercom
callers to the extension can either
hear busy or route to the first avail-
able department number. This only
occurs for calls to the extension di-
rectly, not the department number
assigned in Program 11-07.
04 Hunting Mode
Use this option to set the action taken
when a call reaches the last extension
in the Department Group (0 = hunting
stopped, 1 = hunting repeats with cir-
cular routing through the Department
Group).
05 Extension Group All Ring Mode
Operation
Determine whether calls ringing a De-
partment Group should ring all exten-
sions in the group simultaneously
automatically or manually when using
the service code defined in Program
11-12-09.
06 STG Withdraw Mode
07 Call Recall Restriction for STG
Determine whether or not an unan-
swered call transferred to a Depart-
ment Group should recall the
extension from which it was trans-
ferred.
2-150

Program 16 : Department Group Setup

16-01 : Department Group Basic Data Setup

Department Group Number
Item
When set to (1) Automatic,
only ICM Calls and DID
Calls will ring all the stations
in the Department Group.
Input Data
Maximum 12 characters
0 = Normal Routing (Priority)
1 = Easy - UCD Routing (Circular)
0 = Normal (Intercom caller to
busy department member hears
busy)
1 = Circular (Intercom callers to
busy department member routes
to idle member)
0 = Last extension is called and
hunting is stopped
1 = Circular
0 = Manual (Service Code)
1 = Automatic
0 = Disable (Camp On)
1 = Enable (Overflow Mode)
0 = Disable (Recall)
1 = Enable (No Recall)
Program 16 : Department Group Setup
ISSUE 1.0
1 ~ 32
Related Pro-
Default
gram
No setting 11-07
0 16-02
0 16-02
0
0 11-16-10
0
0