Web Client Operation - Honeywell HLVR4 User Manual

7 Web Client Operation

Network Connection
Login and Logout
Please note, all the operations in chapter seven is based on our HLVR4
DVR.
There might be slightly difference in the interface due to different series.
Before web client operation, please check the following items:
•
Network connection is right
•
DVR and PC network setup is right. Please refer to network
setup(main menu->setting->network)
•
Use order ping ***.***.***.***(* DVR IP address) to check connection
is OK or not. Usually the return TTL value should be less than 255.
Open IE and input DVR address in the address column. For example, if
your DVR IP is 10.1.27.200, then please input http:// 10.1.27.200 in IE
address column.
System pops up warning information to ask you whether install
webrec.cab control or not. Please click yes button.
If you can't download the ActiveX file, please modify your settings as
below:
Honeywell
73