Activating The Ptz Status On Close Option; Ptz Tour Scheduling; Creating A Ptz Tour Schedule - Honeywell Fusion IV User Manual

Activating the PTZ Status on Close Option

PTZ Tour Scheduling

Creating a PTZ Tour Schedule

________________________________________________________________________________________________________
Document 800-05305 Rev A
11/09
1. Start by creating a Preset or Tour for the selected camera. See the instructions
above.
Select either Start Tour or Go To Preset.
2.
Click the Apply button to save.
3.
The PTZ Tour Scheduling option allows users to create set tour schedules for PTZ
cameras connected to the DVR. The Tour Schedule allows users to schedule tours on
specific days of the week and specific hours of the day for multiple PTZ cameras.
Selected time frames are designated in blue and non-selected (default frames) and
shown in white.
1. Click the Tour Schedule button on the PTZ Setup tab.
Select a Day of the Week – or – Click the Single Select Mode button to switch to
2.
Multi Day Mode and select multiple days of the week.
3. Click and drag the mouse cursor to select blocks of time for the selected camera.
Click the Select button.
4.
Repeat for additional cameras.
5.
6. Click the OK button
109