Figure 91: Disconnecting The Fan05 Module From The Switch; Figure 92: Sliding The Fan Module From The Switch - Allied Telesis 950 Series Installation Manual

x950 Series Installation Guide for Stand-alone Switches
2. Carefully pull on the handle to disconnect the line card from the
internal connector in the switch. Refer to Figure 91.
Figure 91. Disconnecting the FAN05 Module from the Switch
3. Slide the fan module out of the switch. Refer to Figure 92.
Figure 92. Sliding the Fan Module from the Switch
4. Continue with the next procedure to install a new FAN05 Module.
147