Enabling Additional Resources - Siemens SENTRON ATC6300 Manual

Functions
5.1 Basic functions
5.1.4.1

Enabling additional resources

The expansion modules provide additional resources that can be used via the corresponding
setup menus.
Note
Availability during physical absence of modules
The setup menus for the expansions are also available if the modules are not physically
present, i.e. the inputs 6-14 on the device can be parameterized, even though no module is
inserted and these inputs are therefore not available.
As it is possible to add several modules of the same type (for example, two communication
interfaces), several of the corresponding setup menus are available and are identified by
consecutive numbering.
The table below shows how many modules of each type can be installed simultaneously and
in which slots they may be used. There must be no more than two modules.
Module type
Communica-
tion
Digital inputs
and outputs
42
Article number Function
3KC9000- RS485 (MODBUS RTU)
8TL74
3KC9000- Ethernet (MODBUS TCP)
8TL75
3KC9000- 4 digital inputs
8TL60
3KC9000- 4 digital outputs, SSR (4 NO contacts)
8TL61
3KC9000- 2 digital inputs and 2 digital outputs, SSR (2 NO
8TL62 contacts)
3KC9000- 2 digital relay outputs (2 changeover contacts)
8TL63
3KC9000- 2 digital inputs and 2 relay outputs (2 NO con-
8TL64 tacts)
Maximum num-
ber that can be
inserted
2
1
2
2
2
2
2
3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01