Enabling Insulation Test - Siemens SITRANS F MAG 8000 Standard Operating Instructions Manual

Qualification certificate
B.2 Enabling insulation test
B.2

Enabling insulation test

The insulation test must be carried out on the advance version of the MAG 8000 or MAG 8000
CT before generating the Qualification Certificate. The procedures for enabling the insulation
test are shown below.
Set "Insulation test enable" to "Yes" if not already enabled.
Select "Device" → "Download to Device ..." to download the change to the device.
130
Operating Instructions, 11/2018, A5E03071515-AE
SITRANS MAG 8000