Proxy - VBrick dme Admin Manual

Proxy

If your network utilizes HTTP(s) proxies, use this screen to specify them.
To access the Proxy fields:

1. Navigate to
Field
Proxy
HTTP Proxy URL
HTTPS Proxy URL
Proxy Exceptions
Username
Password
72
>
System Configuration Network
Description
Check to enable a proxy server. Disabled by default.
HTTP URL of a valid HTTP proxy server. An IP address or
Fully Qualified Domain Name (FQDN) can be used. This
should be in one of the following example formats:
http://10.10.1.201:3128
http://httpproxyname.mycompany.com:3128
Where 10.10.1.201 is an IP address, the FQDN is an HTTP
proxy server address, and 3128 is the proxy port.
Consult your Network Administrator for your own unique
network specifics.
Note: If FQDN is used, please use all lowercase letters.
HTTP URL of a valid HTTPS proxy server. An IP address or
Fully Qualified Domain Name (FQDN) can be used. This
should be in one of the following example formats:
http://10.10.1.201:3128
http://httpsproxyname.mycompany.com:3128
Where 10.10.1.201 is an IP address, and the FQDN is an
HTTPS proxy server address, and 3128 is the proxy port.
Consult your Network Administrator for your own unique
network specifics.
Note: If FQDN is used, please use all lowercase letters.
Use Exceptions when you want to bypass proxies for specific
destinations. To create an Exception(s), include IP addresses
of Exceptions, separated by commas. This should be in the
following example format:
10.10.0.1, 10.10.0.23.
Username for the proxy
Password for the proxy
> section.
Proxy
© Vbrick Systems, Inc.