Rtp Playlists - VBrick dme Admin Manual

Field
Application
Publishing Point
User Name
Password
Use RTCP
Enable
Status
DME Model
7530
7550
7570

RTP Playlists

RTP Playlists make it possible to send stored .mp4 (Part 10) VOD files as live streams. They
can consist of a single file or multiple files and can be reordered and concatenated into a
single playlist. They can also be weighted and played in differing modes; for example, they
can be looped or played sequentially.
You can then use a playlist to create a multicast relay using the .sdp file, i.e. the
For more about this scenario, see Out-7 > Relay (Unicast/Multicast).
To launch a playlist, you can use it in an RTSP URL by specifying the .sdp file name or you
can use it to create an RTP Relay.
114
Description
Only required if you are pulling RTMP. This string is defined by the
source. For example, on a Vbrick encoder, this string corresponds to
the
RTMP Application
Transmitters page. Valid strings are limited to:
vbApp.
This is Publishing Point Name on the source server. If the source
is a Vbrick encoder, use the
Configuration > Servers page on the encoder.
Required if client-side authentication is required by the source
server.
Required if client-side authentication is required on the source
server.
Default =
Enabled
video synchronization for some players. Uncheck if your server does
not generate RTCP reports of if you wish to ignore RTCP reports
from the source.
Use this dropdown to enable or disable the stream. All streams are
disabled by default.
Read only: Disabled | Connected | Receiving.
Number of Configurable Input and Output Streams
25
35
60
value on the Program Configuration >
Resource Name
. RTCP server reports assist maintaining audio/
and
live, vod, vbrick,
on the Program
.
Mount Point
© Vbrick Systems, Inc.