VBrick dme Admin Manual page 107

• There is also a Lock icon that can be hovered over to display status on certificate
installation. This represents if a DME is locked down to https serving or not.
3. Lastly, if you feel that the DME's connection to the Mesh is faulty or needs re-
configuration, do the following:
• Click the
will request from Rev all mesh information (list of peer DMEs) and process each as
necessary. If the DME detects any change between the current settings and the new
list downloaded from Rev , then the DME will locally resets its caching system. This
may have an impact on existing streams and viewers.
Because each DME can be configured differently within your deployment, this should be
repeated on each DME you wish to inspect.
Tip(s):
• If you do not want to utilize the distributed caching mechanism, DME
Mesh, then set all DMEs to preposition content on Rev.
• DMEs can be set as prepositioned on Rev. You cannot set it within the
DME.
• From your DME, if there are no other reachable prepositioned DMEs
(identified within the table) then this DME cannot utilize the Mesh and is
stranded. Consider making this DME prepositioned.
• If you are an existing customer, when you upgrade to Rev v7.6 and DME
v3.6 (or beyond), your DMEs will be automatically defaulted as
prepositioned.
Standalone DME or Legacy (DME with VEMS) Caching Configuration
DME Admin Guide
Auto-Configure from Rev
button to perform a Mesh Update from Rev. This
System Configuration
95